Spannerhead Dot ComSpannerhead.com

Italian Wedge: The Fiat X1/9

November 12, 2012 by Matt

Fiat X1/9 X19 X1-9 Red Black Profile Side

The 1974-1982 Fiat X1/9 carries the distinction of being one of the few (only?) cars with a slash as part of its name. Not only that, it was the last Fiat sold in the US until the brand’s reintroduction to our shores last year, and to this day remains the only production mid-engined Fiat.

Think of it as a Porsche 914 without the pedigree angst. Or a Toyota MR2 without the bizarre interior. Interestingly, the X1/9 was conceived in the same way as the later MR2: By taking an economy car FWD engine, powertrain and front suspension (in this case the Fiat 128’s) and “flipping” it 180°, positioning it immediately behind the seats to create a mid-engined sports car.

Fiat X1/9 X19 X1-9 Black Back Rear Tail

Additional features include a lift-off targa roof panel that stowed in the front luggage compartment, bumpers designed to minimize the visual impact (pun intended) of stultifying 1970s crashworthiness regulations, and a fuel tank and spare tire mounted between the passenger compartment and the engine, as close to the car’s CG as possible. This detail, together with the engine’s location and the car’s featherlight ~2,000 lb curb weight made for go-cart-like handling rivaled only by certain Lotuses. Indeed, the X1/9 is still a force to be reckoned with in certain autocross classes, a testament to Fiat’s formula.

Fiat X1/9 X19 X1-9 Interior Inside Cockpit Console Dash Dashboard

The interior is sensibly laid out and quite stylish for the late ’70s, a well-resolved demonstration of the de rigeur angular themes of the day. The engine wasn’t much to write home about, but with only a ton of car to motivate its task wasn’t arduous. Initially a 1.2l SOHC 4-cylinder developing 63 hp in US trim, a 1.5l, fuel-injected 75 hp version of the engine was rolled out for 1979, marginally improving performance; 60 mph came up from a standstill in around 11 seconds.

On another note, it’s interesting to consider the difference between Fiat’s abandonment of the US market in the early ’80s and their return in the 2010s. The X1/9 was unmistakably a niche car, something of a halo vehicle designed to bolster the Italian automaker’s dashing, somewhat romantic (in an straight-edged ’70s kind of way) appeal in the US. Perhaps having decided that approach was a failure, Fiat decided to reintroduce themselves to an American clientele with a much more mass-market car, the far more conventional supermini 500. As good a car as the 500 is, and as much as I appreciate Fiat’s shift in market strategy, I do hope there remains a bolder voice in the organization, one that would encourage the powers-that-be to gamble a bit by releasing something as quirky as the X1/9 on our shores. Perhaps once the automaker establishes more of a financial beachhead over here they’ll consider it; who knows.

9 Comments on Italian Wedge: The Fiat X1/9

Styling Misfires: The Chevy SSR

November 9, 2012 by Matt

Chevy Chevrolet SSR Hardtop Pickup Yellow

Nope. Nope nope nope.

If there ever was an instance where an automaker should have ignored the “auto show buzz” surrounding a concept and not put it into production, this is it.

Manufactured between 2003 and 2006, the SSR was Chevy’s attempt to capitalize on the retro trend pioneered by the 2002-2005 Ford Thunderbird and 1998-2010 VW New Beetle. Only, in the Chevy’s case, its direct design influences weren’t that obvious. Was it reminiscent of a stepside pickup truck? Was it supposed to recall a hot rod? An El Camino? The SSR’s murky visual lineage dampened its appeal considerably.

Chevy Chevrolet SSR Hardtop Pickup Yellow

Automotive publications, for their part, were gentle in their criticism of its looks. A two-seat convertible pickup with a 300+ hp Corvette V8 under the hood, it was in a niche by itself, and the journalistic world seemed to let the lack of available comparisons spare them the delicate task of reviewing the car without gagging.

The SSR’s few buyers during its 4-year model run, however, remained utterly convinced they had bought one of the coolest cars on the road. That being absolutely not the case, what we have in the SSR is the physical manifestation of “body dysmorphic disorder;” in other words, the inability to conceptualize how one is perceived by others. It might be a bit much to say the SSR is the Michael Jackson of cars, appearance-wise, but it’s close. Again, every owner seems to think driving the SSR elevates them to a new plane of cool, but I can’t imagine a single true car person who would drive the car without a paper bag over his or her head.

Chevy Chevrolet SSR Hardtop Pickup Red Interior Inside Cockpit Console Dash Dashboard

It’s not difficult to appreciate where I’m coming from. Try this: Whatever your thoughts about the SSR as a static piece of automotive sculpture, whatever its underhood prowess, imagine yourself ensconced behind the wheel, cruising down the main drag of your hometown. Yes, picture yourself at the helm of that tacky, cartoonish, bulky, eye magnet of a misshapen piece of quasi-retro schtick and I’ll wager you shudder a bit at the thought. Good riddance.

Editor’s note: This post is part of an ongoing series wherein I discuss unsuccessful cars whose styling was their overlooked (or denied) Achilles heel. Read the other installments here:

No Comments on Styling Misfires: The Chevy SSR

Kevin Thomas and His Homebuilt F1 Car

November 7, 2012 by Matt

Kevin Thomas Homebuilt F1 Formula 1 One Car BAR Lucky Strike Honda 2001

To clarify, that’s homebuilt, not homemade. Kevin Thomas isn’t constructing some kind of replica Formula 1 car from scratch; he’s assembling an actual F1 racer from actual F1 racer parts.

In his backyard.

As with many projects, it all started with an eBay purchase. A longtime F1 fan, Thomas was browsing the popular auction site one day when he stumbled across a listing for a pair of chassis constructed by the now-defunct British American Racing (BAR) team. On a whim, Thomas contacted the seller after the auction had ended and secured the foundation for his project.

Intended for the 2001 F1 season, the BAR chassis Thomas ended up with was relegated to testing duties, but has all the bells and whistles of the cars driven in anger by Jacques Villeneuve and Olivier Panis on circuits across the globe. Thomas has had considerable difficulty sourcing parts specifically for his chassis, so he’s had to cobble together subassemblies from other F1 cars when they come up for sale—a slow, painstaking process that requires more patience than I would have.

It also demands a decent amount of mechanical ability, or at least a willingness to learn. The car’s sidepods, for instance, are from a later Williams F1 car and adapted by Thomas to the BAR tub, and a contemporary Benetton racer lent certain suspension bits. As for the engine, Thomas plans to source a Formula Renault 3.5l V6 engine—much easier to come by than the BAR F1 car’s original 3.0 V10. The Renault engine’s output of “only” around 480 hp is less than two-thirds that of the engine the chassis was designed around, but more than enough to tax the abilities of 98% of amateur racers like Thomas, or you and me, for that matter.

It’s an amazingly ambitious project, and I wish Thomas the best of luck as he tinkers away in his backyard shed on his F1 race car.

4 Comments on Kevin Thomas and His Homebuilt F1 Car

Top Gear Explores 50 Years of Bond Cars

November 5, 2012 by Matt

In anticipation of the upcoming Bond film Skyfall, Top Gear has put together a fantastic retrospective of the history of James Bond’s wheeled vehicles, from Dr. No to the present day. Presented by Richard Hammond, the program covers a variety of topics, from Bond’s traditional association with Aston Martin, to the famous spiral stunt in The Man with the Golden Gun, through the “low point of Bond cars” when the British superspy drove BMWs for three installments, and on to the current Daniel Craig films.

The program also dovetails nicely with my previous post on the early Lotus Esprit, as it was a Bond car for two movies and transformed into a submarine for one. That last bit of trickery was depicted using models in the film, but for the show Hammond has an actual real-life Lotus reconfigured into a submarine, and tests it in a reservoir to examine whether that particular bit of Bond lore could really happen. Well worth watching if you have an hour to spare.

No Comments on Top Gear Explores 50 Years of Bond Cars

Undercover Supercar:
The Early Lotus Esprit

November 3, 2012 by Matt

Lotus Esprit S1 Series 1 White Profile Side View

I have a great deal of affection for the pre-Peter Stevens Lotus Esprit, in other words, for original ’76-’86 car.

Lotus Esprit S2 Series 2 White

Why do I love it so much? In a nutshell, it’s the unconventional ’80s supercar. In contrast to rivals like the Lamborghini Countach or the Ferrari Testarossa that followed the classic “more is more” big engine supercar formula, the Esprit adhered to the traditional Lotus mantra of performance through light weight. It was powered by a comparatively small 2 (later 2.2) liter 4-cylinder engine, offered in both turbocharged and naturally-aspirated flavors. Horsepower ranged from 140 in the earliest US-spec Series 1 (S1) model to 215 in the 1986 Series 3 (S3) Turbo HC Esprit—on paper, nothing to strike fear in the hearts of its Italian competition, but as mentioned above, the Esprit’s light weight of around 2,400 lbs was its trump card, giving it sparkling performance on par with its rivals. 60 mph came and went in less than 5 seconds for the S3 Turbo HC, and the car’s low mass benefited handling and braking as well, making the Esprit a force to be reckoned with.

Lotus Esprit S3 Series 3 Interior Inside Cockpit Console Dash Dashboard

I’m drawn to the early Esprit from a styling perspective as well. In contrast to the softened, rounded post-1986 Peter Stevens redesign, the first three series preserved legendary Italian stylist Giorgetto Giugiaro’s severe, uncompromising wedge shape. There’s an uncluttered simplicity to its lines that brings the perfect proportions to the fore, and the 1976-1986 Esprit just looks like a purer expression of the designer’s original intent, even if Giugiaro did admit to being a fan of the later two designers’ refreshes. The car’s lines also contrast with those of its more flamboyant rivals, and ensured the Esprit a lower level of desirability than a Countach or a Testarossa in a decade like the ’80s of conspicuous consumption. If it hadn’t starred in two James Bond films (Roger Moore’s The Spy Who Loved Me and For Your Eyes Only) it’s doubtful the Esprit would have risen out of enthusiast niche obscurity.

Dell'Orto Dellorto Delorto Carb Carburetor Carburettor Lotus Esprit Turbo

Naturally, as with almost all British cars of the era, there are some maddening problems, or charming quirks, depending on your perspective (and patience levels). The infamous British firm Lucas was responsible for the Esprit’s electrics, with all the (un)reliability that implies. Lotus went through several uneven financial periods during the car’s model run, and used a smattering of old and freshly engineered parts depending on the money available at any given time to be dedicated to development. The transmission, initially sourced from Citroen, was always a weak point, and the interior design, in contrast to the sheetmetal, has aged rather poorly.

As long as an enthusiast owner isn’t expecting to daily-drive the Esprit, the downsides aren’t dealbreakers, and all in all any eventual owners can congratulate themselves on having shown their taste in cars by snagging an unsung hero of the supercar scene.

No Comments on Undercover Supercar:
The Early Lotus Esprit

3 Car Interior Likes

October 31, 2012 by Matt

In the vein of my overanalytical dashboard preferences post a while back, here are a few car interior design features that generate immediate appeal for me:

Acura NSX Interior Inside Console Cockpit Dash Dashboard Design Styling

Consoles that flow up and into the dash. Love it when I see this. The design emphasizes the longitudinal axis, and thus forward motion of the car, and in most cases brings down the cowl height, improving sightlines so that the corners of the car can been more readily seen and positioned by the driver. The interior just seems to flow forward with the car. Example cars: Audi 5000, Nissan Maxima, Z32 Nissan 300ZX, Acura NSX (shown above).

FC Mazda RX-7 RX7 Gauges Instrument Cluster Interior Inside Console Cockpit Dash Dashboard Design Styling

As much instrumentation as possible. Within reason, you can never have too much information about your car’s state at your fingertips. For non-modified cars, I’d like the gauges to be incorporated into the dash design—no pods or extraneous bumps, please—but for cars with aftermarket bits, almost anything goes. I think I’m also drawn to the “comfort factor” of having all these little electronic sentinels reporting back to me. And beyond that, I do believe I harbor secret fantasies of flying a Boeing 747 or the Millenium Falcon, and additional instrumentation brings me one step closer to being on the bridge of either. Example cars: Mark 3 Toyota Supra, Porsche 911, FC Mazda RX-7 (shown above).

Audi B5 S4 Steering Wheel Interior Inside Console Cockpit Dash Dashboard Design Styling

A proper 3-spoke steering wheel. Always a good choice. The three spokes converging in the middle remind me of target crosshairs and the vertical bottom spoke combine to create a visual reference as to the position of the wheel, and emphasize the quality and accuracy of the steering. Example cars: BMW E30 325i, Mazda RX-8, Audi B5 S4 (shown above).

2 Comments on 3 Car Interior Likes

Interesting Engines: The Napier Nomad

October 29, 2012 by Matt

Napier Nomad 1 Aero Engine Motor

The Napier Nomad is unquestionably an incredibly complex piece of engineering. Whether it qualifies as brilliant or completely overwrought is more arguable.

Fresh off the success of the Sabre, most notably the powerplant for the V1 buzz bomb killer Hawker Tempest, Napier embarked on another ambitious engine development program, one that eventually led to the Nomad. First tested in 1949, the Nomad was Napier’s attempt to leverage their piston engine mastery and introduce a fuel-efficient alternative to the then-new jet engine technology.

Napier Nomad 1 Diesel 2-Stroke Aero Engine Motor Schematic Diagram Operation Drawing

At least with respect to the company’s goals of creating an economical engine, the Nomad succeeded. To this day, it remains one of the most efficient piston engines ever made when examined from the standpoint of specific fuel consumption, or fuel consumed per unit of power produced. That said, such economy came at a price: An almost Rube Goldberg-like level of complexity. At its core, the Nomad was a 41-liter, valveless, 2-stroke, horizontally-opposed 12-cylinder diesel engine. Around this, Napier added an array of combustion chambers, valves, couplings, clutches, turbines and compressors designed to capture every last bit of exhaust energy in service of turning the twin contra-rotating propellers bolted to the nose of the engine.

Napier Nomad 1 Diesel 2-Stroke Aero Engine Motor Schematic Diagram Operation Drawing

When it worked, it worked: Mounted in the nose of an Avro Shackleton testbed aircraft, the Nomad produced 3,000 hp with exceptionally low fuel consumption for its day. It’s a tribute to Napier’s expertise and persistence that they managed to get all its parts working harmoniously for 1,000 hours of testing.

Unfortunately, the Nomad, like other incredibly sophisticated piston engines of the day, was simply overtaken by progress—new jet engine technology promised much higher speeds with an exponentially lower level of engine complexity, and as for fuel consumption, it was farther down on most customers’ lists of priorities; the lean days of the early ’70s were still over 20 years away. The Nomad found no takers, and fell into obscurity.

Editor’s note: This post is part of an ongoing series examining unique and significant powerplants. Read the other installments here:

5 Comments on Interesting Engines: The Napier Nomad

14-Year-Old Kathryn DiMaria’s
Pontiac Fiero Project

October 26, 2012 by Matt

Stories like this are why I drag my kids to car shows.

Well, I like the cars too, but I continue to hold out the hope that one or both with take the torch of my car interest, so to speak, and run with it the way 14-year-old Kathryn DiMario has in the clip above.

When she was 12, Kathryn approached her parents with an idea: She would take all her saved babysitting money and purchase a project car to fix up and learn on before she was able to legally drive. Her parents, to their credit, agreed, and worked with her to locate a clapped-out Pontiac Fiero. They expected Kathryn’s interest to wane and the endeavor to peter out after a short time, but the girl persisted, and insisted on doing almost all the work herself, learning about the car’s mechanicals as well as upholstery, welding and other restoration techniques in the process.

Needless to say, if my son or daughter decide one day that they’d like to embark on such an adventure, I’ll have their back 100%. For a more detailed account of Kathryn’s project and to keep abreast of the latest updates, visit her project thread.

2 Comments on 14-Year-Old Kathryn DiMaria’s
Pontiac Fiero Project

Turbo Subaru BRZ in the Works

October 24, 2012 by Matt

Subaru BRZ Silver

Via Left Lane and Autoblog, it appears a turbocharged version of the well-received Subaru BRZ sports coupe is under development. Concerning the engine, Left Lane reports:

The boxer engine will feature a single twin-scroll turbocharger to help reduce lag and a direct fuel injection system that Subaru is developing on its own. Thanks to these and other internal modifications, the flat-four will make up to 280 horsepower and 250 lb-ft. of torque, a big bump over the normally-aspirated BRZ’s 200 ponies and 151 lb-ft. of twist.

So, assuming a roughly 200-lb weight gain for the turbo, associated plumbing and drivetrain and suspension reinforcement, 280 hp in a 3,000-lb car is still a recipe for a mighty tasty power-to-weight ratio. If the stock car can sprint to 60 mph in the mid-6-second range, I’d estimate the mid/low 5s for the turbocharged variant.

Turbo Turbocharged Subaru Engine Motor EJ20 WRX STI

The big question is whether Toyota/Subaru can retain the car’s delightful balance and sublime driving qualities in spite of the numbing effect of additional power. We’ll have to wait on the road tests for the answer, but my hunch is they can, given that it’s “only” an 80-hp bump. And if the turbo BRZ ventures too far into pony car territory, we’ll always have the excellent naturally-aspirated variant to fall back on.

Editor’s note: The image above does not depict the upcoming turbo Subaru BRZ’s engine, but the force-fed flat-4 under the hood of the automaker’s WRX STI high-performance sedan.

5 Comments on Turbo Subaru BRZ in the Works