Driver’s Door Work
Didn’t do too much this weekend; just laid low after pulling Megumi’s engine on Thursday.
I did do some driver’s door work. Vapor barrier before:
Saggy, nasty, goopy tar and “Canadian slime” on the inside. Yuck.
After:
Megumi’s perfect (and conditioned) seal in place with ALL clips (Nori’s was cut, just like the passenger side one). I also reinforced the speaker mounts using the same technique employed for the passenger speaker.
I adjusted the window glass using the bolts to be a little further out at the top:
The window “jumps” a little when it first starts moving down—the passenger side doesn’t do this—so I think it might be maladjusted at the top. It still “jumped” a bit after being adjusted, so it may need more tweaking.
Also also, I took care of some surface rust at the bottom of the door:
“No door rust,” the seller said. Sure…