Spannerhead Dot ComSpannerhead.com

Audi Concepts: The Avus quattro

October 1, 2012 by Matt

Audi Avus quattro concept car aluminum W12

For me, our new series represents a convergence of interests. It’s no secret I’m an unabashed Audi fan, and as a designer, I’m naturally drawn to the cars that epitomize the most uncompromised expression of Audi’s design philosophy: Their concept cars.

Today’s symphony in polished aluminum, the Avus quattro, was introduced in 1991. Its W12 engine marked the first appearance of the now somewhat-commonplace W-configuration, essentially two narrow-angle V6s joined at the crank. Audi quoted a power figure of 502 hp for the 6.0l engine, but it’s questionable as to whether the engine was ever installed, and the Avus hit the car show circuit with a mockup powerplant under the rear glass.

Audi Avus quattro concept car aluminum W12

In any event, the Avus was more of a design exercise than a technical showpiece, although it did feature Audi’s signature quattro AWD system and preface the automaker’s pioneering aluminum construction methods. No, the Avus was first and foremost about the curves, with its downright suggestive waistline and delicate wheel bulges. There were connections with the all-conquering pre-war Auto Union racers, too, with the Avus’ wheels pushed out toward the car’s corners, and the cockpit’s location right up front. But overall, as a combination of sensual appeal expressed in a seemingly austere, form-following-function, futuristic wrapper, it’s arguably without peer. It’s that tension between the seductive and sterile that maintains the Avus’ fascination to this day.

Audi Avus quattro concept car aluminum W12

Audi Avus quattro concept car aluminum W12

If I have any criticism of the design, it’s that the nose treatment appears to be almost an afterthought in light of the drama of the car’s profile and top-view details. The fascia, not coincidentally, is the part of the car which has dated itself most rapidly; with a few changes the rest of the Avus would be quite at home on the modern car show circuit, not so the nose, which would need a full redesign.

But I’m really splitting hairs. The Avus was a showstopper, a bold statement about Audi’s design and technical direction delivered in a shape that could stop traffic. In other words, it was everything a concept car should be.

Image credits: fourtitude.com

Editor’s note: This post is part of an ongoing series discussing Audi’s rich history of legendary concept cars. Read the other installments here:

1 Comment on Audi Concepts: The Avus quattro

The RX-7 Story, Part II: Red

September 28, 2012 by Matt

Mazda RX-7 RX7 FB Red

I pine for this car. Yes, I do.

This is the car on which I cut my teeth mechanically. Before the red RX-7 came along I congratulated myself on being able to change a starter unassisted; afterward I would tackle almost anything with little hesitation (and in many cases, preparation).

It was another eBay purchase, February 2000. This was still before eBay Motors came along and the listing for this car was beyond terrible. Two lines of text and no picture, but the kicker was that it was located just down the road in Greensboro. Having a little extra saved up, Aaron and I made the two-hour round trip to check it out.

Mazda RX-7 RX7 FB Red

When we arrived we couldn’t believe our eyes. Except for a blown engine, the car was pristine, perfect, cherry—literally. The seller worked in an automotive paint shop and had painted the car himself with loving attention to detail. However, aside from his artistic talents with a paint gun, he was a stereotypical American auto enthusiast who, “didn’t know nothing ’bout no rotary engine.” Thus, when the engine blew, he was baffled. Aaron and I, being rotorheads, saw opportunity. We thanked him for his time and returned to Raleigh, intent on scooping it up.

And I did. No one else must have driven out to see the car since my bid was less than $300. The owner delivered the car the following week on a flatbed trailer, visibly bothered that his eBay sale hadn’t gone as well as he had hoped, but a man of his word.

Mazda RX-7 RX7 FB Engine Motor 12A Wankel Rotary

So the plan was hatched. Between the black RX-7 with its strong engine but rusted-out northern chassis and the red RX-7 with its blown engine but sound body, I would make one complete and perfect little sports car. My dad was less than optimistic about my chances of success, having never attempted something as involved as an engine swap, but his skepticism just spurred me on. To shorten the story, I learned a lot, made a couple of time-consuming but non-terminal blunders along the way (keep grease away from the clutch disc!), and by early August, after about a month and a half of work, I fired up the good engine in the red car for the first time. That was an experience unto itself since the car had no exhaust but the manifold at the time and rotary engines create noise all out of proportion to their small displacement. Not only that, but I had squirted some automatic transmission fluid into the combustion chambers to lube the seals pre-startup, and the ensuing cloud from the burning ATF completely blanketed the cul-de-sac. But it ran, and ran well. I was ecstatic.

So where is it now? Why didn’t I keep it? The reasons sounded much more plausible at the time, but today I wish, oh how I wish I had reconsidered. After having the car for a few months and enjoying it thoroughly, for easily-preventable reasons the good engine ate an apex seal. Being in college at the time and in a bit of a temporary financial pinch, I somehow decided the car had to go. So in a fit of misdirection I put it up on eBay and sold it, with a blown engine, for $1500. I probably made money on the whole ordeal, but I still regret it.

The buyer arrived to haul it away the same way it had arrived in my parents’ driveway: On a flatbed trailer. From what I gathered, he was a Wankel enthusiast from somewhere around Goldsboro and planned to do a blow-through Weber turbo install. I never heard from him again after the car disappeared around the corner. Funny thing that’s never happened before or since: My mom witnessed the transaction and actually teared up as the red RX-7 was being trailered away. I didn’t quite know what to make of it then, and still don’t, really. I never knew she’d been so attached to it. If I had only known then how much I would long for it now, perhaps I would have been more sympathetic.

Editor’s note: This post is adapted from a “car history” post I wrote on an older blog of mine some years ago. Read the first installment of the two-part series here.

2 Comments on The RX-7 Story, Part II: Red

The Loveliest Skyline: Nissan’s R33 GT-R

September 26, 2012 by Matt

Nissan R33 Skyline GT-R GTR Silver

Sandwiched between the groundbreaking, headline-grabbing R32 GT-R, and the later darling-of-the-driving-simulator-junkie-scene R34, Nissan’s R33 Skyline GT-R is sort of the red-headed stepchild of the Skyline generational progression.

Nissan R33 Skyline GT-R GTR Engine Motor RB26DETT

Produced between 1993 and 1998, the R33 GT-R improved on the recipe so successfully pioneered by the R32: A twin-turbo, 2.6l inline six developing an underrated 276 hp, computer-controlled AWD mated to a sophisticated suspension incorporating rear-wheel-steering. The under-the-skin changes were admittedly incremental, including new Brembo brakes, revised turbo components and an updated engine management system, but as with all GT-Rs, the whole remained more than the sum of its parts, and was the first non-supercar in production form to lap the Nürburgring in under 8 minutes.

Nissan R33 Skyline GT-R GTR Purple Violet

The more obvious differences between the R32 and R33 are external. Where the earlier car has an aggressive, leaning-forward stance that approximates traditional long-nose short-deck sports car proportions, the R33’s profile more closely describes a teardrop shape. Its C-pillars and rear fenders converge more seamlessly than its predecessor’s, and the effect suggests the R33 would flow around a racetrack instead of simply pulverizing it, as the R32’s lines seem to communicate it would. The later car looks fleet and effortless, yet it retains hints of the power and capability underneath what with its fender flares and thoroughly ducted fascia.

Nissan R33 Skyline GT-R GTR Interior Inside Cockpit Console Dash Dashboard

Unfortunately, without the extroverted techno-brutality that characterizes the R32’s or R34’s looks, the R33 loses much of its curb appeal with the Gran Turismo set. However, that slightly (however slight a Skyline can be) under-the-radar ethos actually makes me like it more. I have a strong attraction to fundamentally good cars that still aren’t the obvious choice, and the R33 represents that formula among Nissan’s range-topping generations of GT-Rs.

4 Comments on The Loveliest Skyline: Nissan’s R33 GT-R

Mystery Brick:
Volvo 242 Group A Turbo “Flathood”

September 24, 2012 by Matt

1983 83 Volvo 242 200 Coupe Group A Turbo Flathood Flat Hood Silver

Volvo “Bricks” (the 200 and 700/900 series) generally aren’t worth very much. Their average market value belies the fact that underneath the frumpy sheetmetal, they’re actually very good cars—reliable, robust and safe. Many worthwhile cars from the ’80s and ’90s, the era in which the Bricks were produced, have since hit the nadir of their depreciation curve and started to come up in value, but given the Volvos’ stylistic debits, I really don’t any of them gaining significant traction in the marketplace—ever, really.

Except, that is, for the car featured in this post. Under consideration today is the 1983-only Volvo 242 Group A Turbo “Flathood.” A specialty version of the standard 242 Turbo coupe, the Flathood (so-called for the straight front edge of its hood, a feature which had, by 1983, been superseded on American 200-series Volvos) was produced solely for homologation purposes, allowing Volvo to run a racing variant of the car in the European Touring Car Championships, a.k.a. Group A. To compete in the series, the Swedish automaker was required to construct 500 copies of the roadgoing version, and they produced exactly that number. They then shipped all 500 across the Atlantic, returned 30 back to Europe to race, and stripped the remaining 470 down to regular 242 Turbo specification and sold them through their regular dealer network.

1983 83 Volvo 242 200 Coupe Group A Turbo Flathood Flat Hood Engine Motor B21FT

However, not all the racing-specific gear was removed. Various theories exist as to just how similar the US-spec car is to its track-ready doppelganger, but what’s known for certain is that the Flathood retains its stiffer springs, intercooler and Euro-style nose. Sadly, the racer’s water injection system, Getrag 5-speed, limited slip differential and bigger brakes were all removed, but most folks who have driven both say that the Flathood feels much faster than a contemporary “regular” 242 Turbo, so it’s suspected the 2.1l, SOHC 4-cylinder B21FT engine produces more than its rated 157 hp, perhaps from an uprated turbo.

1983 83 Volvo 242 200 Coupe Group A Turbo Flathood Flat Hood Interior Inside Cockpit Console Dash Dashboard

I would love to own one. The Flathood has a sort of classic Volvo dorky style about it, emphasized by the distinctive fascia. It’s rare as well, and its official name—242 Group A Turbo—draws a direct connection with that golden age of fire-breathing turbocharged racing machines. Also, the Flathood’s inherent mechanical attributes—RWD, manual transmission, upgradeable turbo’d engine, rack-and-pinion—generate appeal all on their own. But the mystique of the car, the fact there’s a story arc to its creation and the uncertainty surrounding its exact specifications, these things give the Flathood almost irresistible appeal to Volvo Brick lovers. Count me among them.

7 Comments on Mystery Brick:
Volvo 242 Group A Turbo “Flathood”

Epic Styling Fail:
The Upcoming Jaguar F-Type

September 21, 2012 by Matt

Jaguar F-Type FType Convertible Cabriolet Cabrio Droptop Ragtop

Why? Why on God’s green earth, with modern materials and engineering know-how, did they do it? I am a whirlwind of righteous design fury; Jaguar is dead to me.

It’s the bar. The Bar. The big black bar bisecting the upcoming F-Type’s grille. It stands out; it’s obvious; it pushes up the logo and bloats the otherwise attractive grille shape.

Shown above in a teaser photo, I had high hopes for Jaguar’s XK replacement. And as much as I took issue with the styling direction represented by the automaker’s C-X16 concept, whose look heavily influences the F-Type’s, I never argued that it was an ugly car. On the contrary, the C-X16—notably devoid of a blocky grille obstruction—was drop-dead gorgeous, and a worthy, if somewhat unoriginal, inspiration for a future Jaguar.

And it seems as if the Coventry automaker followed that path almost to a tee…except for the fatal flaw in the most prominent area of the car.

Yes, I understand there are new European Union pedestrian safety regulations that have been impacting (pun intended) the fascia design of cars as notable as the new BMW 6-series. But Jaguar should have tried harder to design around the regulations for as important a car to the brand’s image as the new F-Type. As juvenile-looking as it is, as it stands now, I’d take an old XK over the F-Type in a heartbeat.

Am I overreacting? I just hate to see Jaguar repeat its styling history, when by the end of their productions runs, initially stunning cars were rendered well-nigh unrecognizable underneath all the design bloat (XK120, E-Type, etc). And now it seems as if they’re building in the bloat from the beginning…

4 Comments on Epic Styling Fail:
The Upcoming Jaguar F-Type

The RX-7 Story, Part I: Black

September 19, 2012 by Matt

Black RX-7

Acquired mid-October 1999, this was my first real project car. It also doubled as my first eBay purchase. On a whim while at the State Fair in Raleigh that fall, I decided to really go for this car. Aaron owned an ’86 model, the first year of the 2nd generation and a very different machine, albeit with the same “heart”—a rotary engine. I bought it in the days before eBay had a separate section of their site devoted solely to cars, so killer deals (read: bad listings) could be found by trolling the search fields regularly. Aaron happened upon the listing for the black RX-7 and tipped me off to it. There were no pictures and a very terse description of the car.

I won the auction with a bid of around $500. The car was in Shrewsbury, Pennsylvania. I talked my friend Jonathan into driving up there with me to retrieve the car. It wasn’t that difficult, seeing as how a friend of his (and unbeknownst to him at the time, his future wife) attended Messiah college nearby and he was eager to visit her. We drove the family minivan north through the night, stopping only for dinner at a roadside Blimpie’s. I left him at the college and drove back down the highway to a motel near Shrewsbury, intent on picking up the car the next day.

The following morning, after a few wrong turns I found the house and the car. The actual owner of the car (a student) wasn’t present, so I did the title transfer with his parents, who were a little perturbed at having to sacrifice part of their Saturday morning to get rid of a front yard eyesore.

Paperwork squared away, I turned my attention to the car. It hadn’t moved in a year or so and was a bit rough, with a mismatched silver front right fender. Amazingly, it started well enough and ran, at least until I got the car about 50 feet out of the driveway, at which point it went completely dead. No cranking, no dash lights; nothing. I panicked for about 10 seconds and set about trying to solve the problem. I wasn’t keen on having to tow the car from PA to central NC, so there certainly was a sense of urgency. I knew it was an electrical problem, so I rooted through the minivan to see what I could find to aid diagnosis. After some searching I came up with a spare taillight bulb and a pair of twist-ties. I rigged these together to function as a test light and poked around the engine bay of the RX-7 looking for the break in the system. Turns out a fusible link, one of the main fuses protecting the electrical system, had broken from the strain of not having had current flowing through it in some time, so I twisted the two halves of the link together, tried the car again and it fired right up. I drove the minivan back up the highway, picked up Jonathan from Messiah, and we booked it back down I95 and I85, going 80+ mph the whole way. We made excellent time, and returned home that night.

At the time, I was 20 and had very little experience working on cars, though I had a considerable amount of “theoretical” knowledge. With Aaron’s assistance and encouragement, though, I started to tear into the RX-7. A project day at his house cured a couple of electrical bugs, and he showed me how to prep and paint the fender to match the rest of the car (though I later “got happy” with a can of spray paint and ruined the day’s work). I bought a high-flow downpipe and catalytic converter to install as well, and while we were able to get it on, the rest of the exhaust system crumbled as we unbolted it, having been exposed to many northern winters. I drove it home with no catback, and marveled that such a little engine could make so much noise…

Continue reading with “Part II: Red.”

Editor’s note: This post is adapted from a “car history” post I wrote on an older blog of mine some years ago. The photo above does not depict the actual car; the only image I have of it resides in one of my parents’ photo albums and will be added once scanned.

2 Comments on The RX-7 Story, Part I: Black

My Favorite Lambo: The Urraco

September 17, 2012 by Matt

Lamborghini Lambo Urraco Uracco Urracco Red

Yup, this is the one. Forget the Miura, Countach, Gallardo or Aventador (among others); I’d walk past all of them in favor of the lowly, 2+2, slightly ungainly-looking Urraco.

I think I fell in love with it as a boy. I had the standard white Countach wall poster, and I talked my parents into buying me one of those glossy coffee tables books about the history of Lamborghini so that I could drool over more illustrations of the flamboyant ’80s supercar icon. But a funny thing happened: As nice as the half dozen Countach images were, I discovered other Lambos. The Miura had these curves, and looked so different from my beloved Countach, and in between the two there were a few other models like the Sihouette, Jalpa, Espada…and this intriguing-looking mid-engined 2+2: The Urraco.

Lamborghini Lambo Urraco Uracco Urracco Yellow

While its proportions were a bit “off” on account of the rear seats pushing back the transversely-mounted engine, the detailing was understated and tidy, and the car’s uniqueness and lack of notoriety compared to its more flamboyant stablemates was appealing, even more so now that I’ve gotten over my boyish attraction to wings ‘n things.

Lamborghini Lambo Urraco Uracco Urracco Engine Motor V8

Powered by a 2.0l-3.0l range of SOHC (and in the case of the 3.0l, DOHC) V8s, output nudged 250 hp in the later versions, good for an optimistic 5.6 second sprint to 60 mph. The driver was treated to a Porsche-like swath of instrumentation (when it worked) and handling was decently balanced, as you’d expect from the mid-engined configuration.

Lamborghini Lambo Urraco Uracco Urracco Interior Inside Cockpit Console Dash Dashboard

I think my attraction to the Urraco was finally cemented after viewing what’s probably become, for some reason I can’t quite put my finger on, my favorite Top Gear car escapade: The Budget Supercars Challenge (Season 7, Episode 4). In it, the presenters each purchase a mid-engined, Italian exotic for less than $16,000 and have to coax their second-hand thoroughbreds through a number of trials, among them a track test, dyno evaluation, serviceability contest and fuel economy challenge. All three cars— Richard’s Dino 308 GT4, Jeremy’s Maserati Merak V6 and James’ Urraco—perform miserably, but for me that’s kind of beside the point. All three cars are rare and cool and it’s just a treat to see them driving around and to get firsthand impressions and historical tidbits from the guys. The Urraco in particular stands out to me; without hesitation, it’s the one I’d drive home (assuming I could get it home). As far as quirky European supercars go, it’s just right.

Click here to view the entire challenge, in four parts.

6 Comments on My Favorite Lambo: The Urraco

The FWD BMWs Are Coming…

September 14, 2012 by Matt

BMW Concept Active Tourer FWD Brown EV Electric Car Hybrid Plug In

I can hear the PR spin now: “It’s just a concept. And it’s a hybrid. No relationship to our performance models whatsoever! Nothing to see here… Move along.”

This is how it begins, with an innocent “broadening of the product line” to compete effectively in more market segments, in the case of the BMW “Concept Active Tourer” (shown above) the burgeoning small crossover niche. And I predict, after a production version is released, a conventional non-hybrid powertrain will be offered alongside the hybrid. And slowly, gradually, that engine and chassis will underpin a new class of compact BMWs, a 1-series replacement perhaps. And with that, one of the automaker’s core principles will be compromised.

Yes, as established in my post last year on the matter, I’m well aware BMW is already responsible for the development of a FWD car in the Mini—and a good one at that—but the BMW brand itself, the car with the unmistakable double kidney grille, has remained untarnished by the inevitable dynamic compromises that come with a FWD layout. There’s simply no way to make a FWD car feel like a RWD car, and the qualities inherent in the latter have always been essential to the “BMW feel.” So again, its the Bavarian automaker’s prerogative to slap a blue and white roundel on whatever they want, but a spade can’t be made a heart, and any salesperson from the company claiming that a new FWD car “still has the same feel” as one of their classics is, well, selling something. Interested to see how this plays out.

6 Comments on The FWD BMWs Are Coming…

Mercs I Would Consider: The C111

September 12, 2012 by Matt

Mercedes C111 Orange

Okay, so being an experimental car, I can’t really consider this one from the standpoint of a possible purchase. But it’s still one of my favorite Mercedes.

Appearing in at least three distinct incarnations starting in 1969, the first two C111 evolutionary steps represented testbeds for Mercedes’ Wankel, or rotary, engine program, and the last housed the automaker’s latest high-performance diesel engine efforts. More than an engine platform, though, the C111 was an outlet of sorts for Mercedes’ engineers. The automaker’s racing program had been shuttered in the aftermath of the 1955 Le Mans disaster, and its development team was hungry to apply themselves to something more exciting than standard-issue production sedans. As it was produced, then, the C111 was trimmed and finished to a degree unheard of for an average technology demonstrator. No spartan development mule, all three generations sported a tractable engine, decked out interior, a refined chassis and even air conditioning. Indeed, as the late Paul Frère reports in this Road & Track feature article:

The C111-II is so elegant and businesslike that, with modern technology under its skin and wider tires, it would be the hit of any motor show today. No wonder that at the time, the factory received many blank checks from potential customers [eager] to acquire a replica.

Mercedes C111 Orange Wankel Rotary Engine

Despite the luxurious trimmings, all three incarnations of the C111 were very quick. The initial 3-rotor Wankel-powered C111-I’s engine pumped out a characteristically smooth 280 hp, and the II’s 4-rotor engine raised that power figure to an even 350. That was a lot of power for the late ’60s and early ’70s, and it allowed the car to reach 60 mph from a standstill in under 5 seconds, as good as any contemporary muscle car from our neck of the woods. Even the later, diesel-powered C111-III, while not quite as fast as its predecessors, set several speed + economy + endurance records.

The bodywork was steadily refined throughout the car’s evolution, and has a distinctly Teutonic, functional feel to it, kind of what a German GT40 Mark 3 might have looked like. That said, I think it looks fantastic, and as Frère alluded to in the above quote, the C111 has a kind of timeless appeal. Completely free from any Mercedes styling cues—gullwing doors excepted—the car sort of stands alone in the automaker’s history as one of the few times they really gave their engineers and stylists free rein to consolidate their expertise and innovative leanings into one car.

Mercedes C111 Wankel Rotary Engine Motor 4-Rotor

Why wasn’t it produced? As much freedom as Mercedes gave their development team with the C111 project, they were clear to point out that the car was a technology demonstrator, and had no chance of progressing beyond that stage. Also, as refined as it was, the engine technology was the C111’s real raison d’être, and when Mercedes started hitting hurdles with their Wankel engine program, instead of persevering like Mazda did, eventually overcoming most of the technical and production challenges, the German automaker decided to pull the plug and direct its resources elsewhere.

Mercedes C111 Interior Inside Cockpit Console Dash Dashboard Gauges Instruments

It’s a shame. I see the C111 as a sort of a proto-BMW M1, which was itself a kind of pre-Acura NSX: An archetype of a truly user-friendly supercar. It had some rough edges, to be sure (Frère spotlights an outdated steering system and tricky handling at the limit, among other things), but overall the C111 made a considerable effort to “meet the driver halfway,” as it were, instead of being the hot, cramped, sweaty, evil-handling supercar its Italian contemporaries were. Between its refinement, looks and technological bravery, I have a great deal of admiration for it.

Editor’s note: This post is part of an ongoing series highlighting Mercedes models worthy of enthusiast consideration. Read the other installments here:

No Comments on Mercs I Would Consider: The C111