Spannerhead Dot ComSpannerhead.com

Learning To Drive Stick, Part I

June 12, 2012 by Matt

6 Six Speed Shifter Stickshift Manual Trans Transmission Tranny Shift Pattern

A couple of weeks ago, I decided to teach my wife how to drive a stickshift.

The endeavor was borne out of necessity as much as any other reason; there have been more than a few times I’ve had to take the BMW when it would have been much more convenient to drive the minivan, because my wife couldn’t drive a 5-speed. And supposing I was driving the minivan and had an accident, my wife would need to at least have some basic knowledge of how to operate a manual transmission in order to be able to come to me.

She recognized those reasons too, and she’s always loved the BMW, so she was eager to learn how to drive it. Through the years, I’d given a couple of folks quick lessons in the basics, so I had a rough idea of how to approach it:

  1. Find a semi-secluded, completely open parking lot.
  2. Explain the basics of what the clutch pedal and gearshift actually do using a simple diagram, but don’t overwhelm with technical details.
  3. Practice starting off without the aid of the gas pedal in order to develop a feel for where the clutch takes up.
  4. Progress to 1-2 and 2-3 gear changes once the fundamentals of starting out are established.

And over the course of 45 minutes or so, that’s exactly what we did. She killed the car at least a dozen times, but that’s wholly expected for someone just learning the ropes. I was proud of her for always remembering to push in the clutch pedal when restarting the car; new stickshift initiates can easily forget that requirement in the midst of the other half-dozen things they need to remember to do (but are second nature to those of us who’ve been driving stick for years).

I’m most nervous about hill starts. We won’t tackle those until the next lesson or two. When I first learned to drive stick at age 17, hill starts scared me, and I still feel a slight twinge of anxiety when called upon to perform one nowadays, just knowing that a stall or worse, backing into the car behind me, is just a slip of a pedal away. All in good time.

11 Comments on Learning To Drive Stick, Part I

Datsun 240Z Restoration: On The Road

June 10, 2012 by Matt

Alternate post title: I need a camera mount. Badly.

Alternate post title #2: Glimpses of future greatness at 4000 rpm.

Note: The “thoroughly depressed” line at the beginning references another series of clips I shot right before the drive, inventorying many of the car’s “trouble areas.” That video will be featured in a future post in this series.

So, after working like a crazy person getting the driveline reassembled on Monday, the needed brake bridge didn’t arrive until Wednesday, leaving me with hours to install it, bleed the hydraulic and work out what bugs I could via a few test drives that evening, in order to confirm the car was at least passably roadworthy for the following morning, when I drove my son to school in the Z for his last day of 1st grade.

And aside from mushy brakes (investigation still underway) and mysterious timing problems (solution TBD), the car performed like a champ, and he greatly enjoyed his ~2 mile drive to school.

So what’s the plan now, since I’ve gotten it running again? Enjoy it for a bit, while fixing the remaining running issues. In the meantime, I’ll tackle additional home projects, make time for family activities over the summer, and prepare the garage for the teardown. Even after completing the perimeter storage system, there’s still quite a bit to be done:

  • Cut back the castering work table to make room for the table saw and eventual purchase of a tool chest
  • Build a hanging shelf in the center of the garage for doors, fenders, hood, and other large car pieces
  • Score a parts cleaning tank and possibly a media blasting cabinet

Among other things. So there’s still a long way to go. But the memory of how it feels to row through the gears and haw at the thin wooden steering wheel is fresh, and motivating.

Editor’s note: This post is Part 16 of an ongoing series chronicling my efforts toward the restoration of my 1972 Datsun 240Z, originally my father’s. Read the other installments here:

4 Comments on Datsun 240Z Restoration: On The Road

2012 Champion Porsche 911 Turbo RSR:
The Antihero

June 8, 2012 by Matt

2012 Champion Motorsport Porsche 911 Turbo RSR 997 Black

Funny thing about the Porsche 911—whether on the street or on the track, it always seems like the “good guy.” Yes, its mechanical configuration is unorthodox, and its owners snooty from time to time, but competing against a reckless Ferrari or headstrong BMW, the 911 is always (if you’ll pardon the non-Teutonic analogy) the Captain America of the bunch—the forthright, unflappable do-gooder in a crowd of capable misfits.

Until this 911.

Car and Driver‘s July 2012 feature story on the 2012 Champion Motorsport 911 Turbo RSR, internally known as the CMSP-38, bills the car as “the coolest 911 ever.” I’d choose a different adjective: Evil.

The price certainly is. Prepare to shell out near-as-makes-no-difference $400K for the privilege of parking one in your garage, on top of which get ready to fork over additional suitcases of Benjamins as track days—the CMSP-38’s natural habitat—consume tires and pricey specialty Porsche bits.

Which isn’t to say the car can’t be driven on the street—it can, and quite pleasantly, but as the C&D article makes clear, the objective performance numbers—640 hp, 0-60 in 2.7—while properly stratospheric, aren’t distinct enough from the plebeian 911 Turbo S’s to warrant the additional cash for bragging rights alone. No, the intent behind Champion Motorsport’s wide body, aero and track-centric modifications is to make those kinds of numbers much more usable. It’s one thing if you’ve got Roger Federer’s “liquid whip” forehand; it’s phenomenal if you can hit that forehand from anywhere on the court. Giving the performance numbers that kind of mobility is what Champion has achieved with the CMSP-38.

And then they decided to offer all that unheard-of performance bandwidth in a wrapper that looks like it would just as soon rip your face off as shake your hand. Behold the duality of the Champion 911 RSR: The German equivalent of the Batmobile; the heart of gold ensconced in a menacing shape; lethal force harnessed in the service of what’s right, in this case going very, very fast around a race track. Evil—controlled.

No Comments on 2012 Champion Porsche 911 Turbo RSR:
The Antihero

Datsun 240Z Restoration:
Getting It Back On The Road

June 5, 2012 by Matt

Datsun 240Z Restoration Driveshaft Axle Shafts Halfshafts Diff Differential Subframe Rear Suspension Mustache Bar

Very sore today. I’ve been going full steam trying to get the Z back on the road before this Thursday, since it’s my son’s last day of 1st grade and I promised him I’d drive him to school in it.

The upshot is that after spending most of the last month “topside,” getting the engine running, these past few weeks have seen me mostly under the car, up to my elbows in dirty, cramped brake, clutch and driveline work.

In a nutshell, I’ve:

  • Replaced the clutch master cylinder, slave cylinder and rubber line
  • Replaced the brake master cylinder and rubber lines and rebuilt all four brakes
  • Replaced the transmission’s rear oil seal
  • Added new trans fluid (Red Line MT-90)
  • Replaced the differential cover gasket
  • Added new gear oil to the diff (Red Line 75W-90)

And now for some pictures:

Datsun 240Z Restoration Driveshaft Axle Shafts Halfshafts Diff Differential Subframe

These are all the parts that had to come off for me to be able replace the cover gasket on the diff. The axle shafts in particular were a bear to remove. More modern CV joints and circlips make life much easier.

Datsun 240Z Restoration Diff Differential R180 Crown Gear Carrier

The internals of the diff looked relatively unscathed after 40 years. However, to my recollection, there is a pronounced whine from the diff whilst driving, something that will be looked into further during the full restoration phase.

Datsun 240Z Restoration Diff Differential Gasket Breather Baffle Plate

Interesting find: There is a (apparently non-OEM) baffle for the diff breather sandwiched in between two cover gaskets. It was a bit annoying to have to order another gasket, but I’m glad it’s there.

Datsun 240Z Restoration Drum Brakes Rear Wheel Cylinder Piston Backing Plate

I despise drum brakes. Yes, I’ve heard all the arguments for how a disc conversion is expensive, and that my braking performance will likely actually decrease slightly, but to not have to deal with pulling off drums that are fused to the hub, or rebuild ornery wheel cylinders… I would pay quite a bit. And of course, there’s also the fact that discs just look better.

With any luck, I’ll have it on the road for a test drive tonight. Just need to bleed the clutch and brake systems and we’ll be good to go. Video (hopefully) forthcoming.

Update: (9:05 PM) The required brake bridge didn’t come in tonight, as promised. Frustrating. Won’t have a whole evening to tune it before Thursday, but…I’ll make the best of it. Disappointing.

Editor’s note: This post is Part 15 of an ongoing series chronicling my efforts toward the restoration of my 1972 Datsun 240Z, originally my father’s. Read the other installments here:

1 Comment on Datsun 240Z Restoration:
Getting It Back On The Road

A Morning at VIR

May 31, 2012 by Matt

VIR Virginia International Raceway SAARS MAARC Challenge 2012

Earlier in the month, I took my kids to the Double SAARC/MAARS club race at Virginia International Raceway, or VIR, near Danville. I’d attended the annual springtime event before, thought not in years, but it was much as I remembered it: $10 cost of entry for a ton of racing action, all different classes of cars, free and easy access to the pits, drivers and teams, and wide open areas of the infield for the kids to run around in. I bought my dad along, too, and they all loved it.

The free parade laps of the track at lunchtime were a definite highlight. The kids loved spiraling down through the Rollercoaster and up through the Climbing Esses. It was great fun.

Click on the jump to view the photos!

6 Comments on A Morning at VIR

What Is A Sports Car?

May 29, 2012 by Matt

Datsun 240Z Driving Red

Although not quite as intense as the recent controversy surrounding the automotive term “coupe” (set off by the introduction of so-called “four-door coupes”), the precise definition of the descriptor “sports car” has been debated for far longer.

Can a sports car have more than two doors? Does it matter which wheels are driven? Need it have only two seats? Is sports-car-dom the exclusive province of the classic convertible?

While (in my mind) the definition of “coupe” is far more objective—two doors, and no more—the meaning of the term “sports car” is more subjectively rooted in the philosophy that underscores a car’s raison d’être. Put succinctly, to me, a sports car uniquely prioritizes enjoyment in two areas: Driving enjoyment and looks.

In other words, a sports car is more of an idea than a cut-and-dried checklist of physical attributes a car may or may not have. That said, the idea does carry with it some inescapable connotations.

Triumph TR6 Green

For one, the notion that a sports car places aesthetics above almost all else rules out four-door cars, since back doors and a somewhat usable rear seat are, in essence, compromises in the name of practicality. Also, for every attractive sedan (and there are many), I can just as easily find a more visually pleasing two-door shape. So while the sports car concept may not rule out four-door cars by definition, it does by implication.

The same goes for the attribute of driving enjoyment. Whatever the merits of worthy front wheel drive cars, their engineers compromised—they opted for packaging efficiency, or platform sharing economies with other models in an automaker’s range or a host of other reasons and denied the car the mechanical configuration best suited to maximizing driving enjoyment: Rear wheel drive.

Ironically, the subjective definition of a sport car in terms of its vehicular priorities becomes a far more useful tool than an objective one in establishing a car’s category. Rather than wondering, for example, whether a BMW 8 series should be considered a sports car, given its two doors and RWD chassis, we can apply the subjective test and observe that significant compromises were made in the name of luxury, concessions which effectively place it outside the circle of true sports cars. And the template can be applied to just about any car with ease.

I think it’s a workable concept. Let’s lay to rest the notion that “all sports cars must have X, Y or Z,” and think more deeply about cars’ priorities and their designers’ intentions.

1 Comment on What Is A Sports Car?

An Hour At The Vintage

May 27, 2012 by Matt

The Vintage Old Salem Winston Salem BMW Show Classic 2012

Dragged the kids to a local BMW show for a bit Saturday morning. An annual gathering of vintage (pre-E32 7 series) BMWs the show was a cornucopia of classic German performance machinery. Dominated by 2002s, E30 M3s and E9 coupes, there were a scattering of E28 5 series, E24 6 series and other types mixed in.

Click on the jump to view the photos!

No Comments on An Hour At The Vintage

2015 Ford Mustang: Post-Retro Pony?

May 24, 2012 by Matt

2015 Next Generation Gen Ford Mustang Concept Red

Motor Trend recently offered the latest in a long line of speculation over the design direction of the next generation of Ford’s most important upcoming car, the 2015 Mustang.

Ford’s designers have a supremely daunting balancing act to perform, having to move the car stylistically beyond its retro roots while simultaneously capturing the nostalgic charm that caused the ’05+ Mustang to become such a breakout hit. I don’t envy them.

2015 Next Generation Gen Ford Mustang Concept Blue

In many ways the stylists’ task was much easier with the ’10+ refresh. They could afford to coast a bit on the retro themes pioneered by its immediate predecessor, and simply tidy up and tighten the proportions and detailing. For 2015, though, a bigger, more wholesale change is expected. Time will tell whether they’re able to successfully walk the nostalgia/progress tightrope, or whether the new Mustang ends up having all the appeal of a classic rock band trying pathetically to reinvent itself and “stay current.” For a car that draws so much on its own heritage for its appeal, the margin for error is very small indeed.

A quick disclaimer: I should be clear that the images shown in this post aren’t depictions of the actual 2015 Ford Mustang, nor even concept renderings the automaker itself has released, but purely speculative takes by the automotive press and blogosphere.

4 Comments on 2015 Ford Mustang: Post-Retro Pony?

Cars That Look Awful Without Spoilers

May 22, 2012 by Matt

As a designer, I’d like to think that my designs don’t stand or fall depending on whether or not a certain design element is present. Especially given that engineers have to comb over the design and alter it so that it’s able to actually be manufactured economically, it’s wise to not cling too tightly to any one particular element.

Unfortunately, many automakers all too often anchor their designs too firmly in a particular styling detail (the BMW E38’s rocker panels, for example), and frequently it happens to be one that isn’t integrated with the car’s proportions or worse, removable. The cars featured in this post fall into the latter category, and the absence of their factory-designed spoilers, or rear wings, completely compromises their styling integrity.

Mk4 Mark 4 Toyota Supra JZA80 No Spoiler Wing

’93-’98 Toyota Supra: Notwithstanding its legendary status in the import tuner scene, this car’s styling was never warmly received by the automotive press at large. One publication aptly described it as a “pastiche of styling cues from other, more coherent cars.” And with its dramatic spoiler removed, the flaws in the Mark 4 Supra’s proportions stand out all the more.

Mitsubishi Mitsu Evo Evolution 10 X MR No Spoiler Wing

Mitsubishi Lancer Evolution: Here’s an instance where a vehicle needs its spoiler not only for visual balance, but also to reinforce its “rally-ready” image. The Evo and archrival Subaru WRX STI wouldn’t be what they are without a liberal sprinkling of scoops, fins and wings. Bereft of its spoiler, the Evo’s econobox proportions scream.

Porsche 924 Red No Spoiler Wing

Porsche 924: Credit Porsche for recognizing this problem, and tackling it head-on with the later 924 and 944, which were never, ever seen without their giant rubber spoilers. The early 924’s cool reception (owing mainly to its mixed Porsche/VW pedigree) was chilled even further by the car’s unfinished-looking, egg-like rump.

Mazda MX-6 MX6 No Spoiler Wing

Mazda MX-6: With its fetching teardrop proportions, Mazda’s second-generation MX-6 is undoubtedly one of the loveliest cars of the mid-’90s era. All the more tragic, then, to witness a spoiler-less example, with its awkward profile. A winged MX-6 is such a study in taste and automotive grace that even a step away from that peak of design is a steep drop, visually-speaking.

11 Comments on Cars That Look Awful Without Spoilers